RUKO Bi-metal Hole Saw HSSE-Co 8 with Regular Fine Pitch Toothing Ø 114mm vendor_PATCO For use with BV500 (S500)

For use with BV500 (S500) and A300T tanning units

Expand spring to install or remove

1 Ω 1 Ω 10 Ω Accuracy ±(7% of rdg + 2 digit) Operating error ±(10% of rdg + 5 digit) Additional error because of probe- and auxiliary earth typ

The built-in soft start module will reduce initial start-up shock

Hand/Arm Vibration - Cutting Wood: <2

RUKO Bi-metal Hole Saw HSSE-Co 8 with Regular Fine Pitch Toothing Ø 114mm vendor_PATCO For use with BV500 (S500)Overview The fine toothing is particularly suitable for cutting metals. It ensures smoother running and reduces the necessary effort. The reduction in heat development during cutting increases tool life, especially in the case of metals. Suitable for alloyed and non alloyed steels (up to 1. 000 N mm strength), high chromium alloyed steels such as stainless steel, steels resistant to rusts and acids, non ferrous and light metals. The RUKO bi metal hole