Rule Bilge Pump - Automatic 500gph 24Volt PANEL|DISTRIBUTION Mounting hole spacing (in): 2

Mounting hole spacing (in): 2 1/8 in

or baby carrier

Keep in mind

Working load (kg): 360

Quick drain mesh pockets

Rule Bilge Pump - Automatic 500gph 24Volt PANEL|DISTRIBUTION Mounting hole spacing (in): 2This next generation water sensing bilge pump works on the principle of impeller resistance. The pump turns on every 2 1 2 minutes for about one second to sense for water. If water is present, the pump will sense the resistance of the water against the impeller and continue to run until all the water is removed. After that, it will resume checking for water every 2 1 2 minutes. Features: Completely automatic operation with manual override no float