Ilmberger - Tail Cover with Grab Rails for K 1200/1300 past type tag-Communication Systems - Parts A standard position and 1

A standard position and 1 clip to lift up

Approximately every ½ turn

Return angle of only 30 ° through placement in the corner-width rectangular prisms in the open end

To overcome this problem

So you can easily attach the special ZEGA Evo accessory holders without drilling holes in your new case

Ilmberger - Tail Cover with Grab Rails for K 1200/1300 past type tag-Communication Systems - Parts A standard position and 1A tail end that optimally captures the tail light and perfectly completes the K dynamics. Ilmberger uses pre impregnated carbon fibre matrices for the high quality carbon. The fibre volume is dimensions and the alignment of the individual fibres is defined. The matrix is then laminated bubble free by hand and coated twice with a protective layer. The added clear varnish layer protects and emphasises the three dimensional effect of the carbon