Assembly Turning Handle Category_Default Category/Products/Motors and Tap Cutters/Tap Cutters and Calcium Cutters The MPR-100 is made in

The MPR-100 is made in the USA from high-quality ABS plastic and is designed to withstand the rigors of daily use

2” round wire type corkscrew and the coiling about 12” long

hardware and all you need to connect to our fiberglass poles

Then by using our fiberglass pole system you can lower the roller grabber to the bottom of the manhole with your nozzle in the right direction and when set in front of the sewer line up just turn on the water to let the nozzle fly

Please see our fiberglass poles i

Assembly Turning Handle Category_Default Category/Products/Motors and Tap Cutters/Tap Cutters and Calcium Cutters The MPR-100 is made inThis tool is specifically designed to follow the groove in the sectional rod couplings. As the locking dog slides in the groove a slight rotation will engage it firmly into the coupling center hole and hold the coupling securely while assembling the rod nuts. The spring loaded dog is disengaged by just one finger.