Carb to Head Inlet Rubbers: Kawasaki Z700 Z 700 (1984) Kawasaki Z200 They have been manufactured to

They have been manufactured to replace the original set of head stock bearings on a Yamaha TW200 for the years and models shown above

This set of head stock bearings are taper roller style and have been manufactured to replace the original set of steering bearings on a KTM 60 SX for the years and models shown above

This set of rear shocks have been manufactured to replace the original factory shocks on a Suzuki GS850 for the years and models shown above

The top bearing is sized ID25 x OD47 x WTH15 and bottom bearing sized ID30x OD55 x WTH17

The Ignition coil has been designed to replace the original coil 21121-1010

Carb to Head Inlet Rubbers: Kawasaki Z700 Z 700 (1984) Kawasaki Z200 They have been manufactured toBrand new carb to head inlet intake rubbers to fit: Kawasaki Z KZ 700 A (1984). This set of carburettor to head intake inlet rubber manifold rubbers have been manufactured to replace the original set on a Kawasaki Z700 KZ700 for the years and models shown above. They will replace the following OEM numbers: 16065 1132.