Pay in 4 interest-free payments of $3.00 Learn more
Ships within 48 hours · Estimated delivery Aug 18 - Aug 23
The source of the power supply can be configured with a jumper located on the board
Dieses AZ-Delivery Kit enthält folgende 35 Sensoren:
1 Stück HC-SR04 Ultraschallsensormodul
Another advantage of the Nano compared to a Raspberry Pi is that the AZ-Nano V3 board is ready to start in 1-2 seconds and does not have to be shut down to switch it off
It allows 16 separate PWM signals to be controlled via a single I²C interface
8-Relais Modul 5V mit Optokoppler Low-Level-Trigger kompatibel mit Arduino und Raspberry Pi category_Aktoren The source of the powerOur AZ Delivery relay modules switch quickly and reliably many switching operations. Thanks to an additional transistor, the module can be switched with most microcontrollers with little current. The relays used are generously dimensioned to allow permanent operation even under unfavorable operating conditions. The optocouplers and diodes protect your controller from damage. The source of the power supply can be configured with a jumper located on the
