Chrome Rear Shock Absorbers: Honda PCX125 PCX 125 (2010-2017) Suzuki RM250 55mm centre to centre with

55mm centre to centre with 1 spade connector and 1 HT lead and plug cap

This steering bearing set is taper roller style and has been designed to replace the factory bearings on a Yamaha YZ400 for the years 1977

Piston Kit (piston

This ignition coil pack set has been designed to replace 4BH-82310-01

Please check as some models used 80mm mounting

Chrome Rear Shock Absorbers: Honda PCX125 PCX 125 (2010-2017) Suzuki RM250 55mm centre to centre withBrand new set of chrome rear shock absorbers to fit: Honda PCX 125 (2010 2017). This set of rear shocks is designed to replace the original factory shocks on a Honda PCX 125 for the years and models shown above. They have 310mm pin fork mounting. The top pin bush is 10mm. They will replace: 52400 KWN 711. The shocks are chrome which can be seen in the picture. You'll receive the exact shocks in the picture. They're also available in black, please see